Single spindle, Two turrets, Twin CNC System
Two turrets can operate simultaneously and carry out different cutting process on both ends.
Features
- Single spindle, Two turrets, Twin CNC System
Two turrets can operate simultaneously and carry out different cutting process on both ends. - Shaft, rod or tubes both ends cutting (O.D.&I.D.) are carried out simultaneously to obtain very high concentricity and benefit.
- Special auto loading & Unloading system can be fitted to handle workpiece with unsymmetrical or special-shaped on ends.
- Special spindle can be ordered for special job requirements.
Specifications
| 型號 | Model | UNIT | FC-TF10/TP10 |
|---|---|---|---|
| 主軸 | SPINDLE | ||
| 主軸數 | No. of spindle | unit | 1 |
| 最高轉速 | Max.speed | rpm | 4000 |
| 進給速度 | Feedrate | ||
| X,Y(Z) 軸快速移動 | X/Z axis rapid traverse | M/min | 12 |
| 行程 | Stroke | ||
| X1 軸行程 | X1 axis stroke | mm | 100 |
| X2 軸行程 | X2 axis stroke | mm | 100 |
| Z1 軸行程 | Z1 axis stroke | mm | 220 |
| Z2 軸行程 | Z2 axis stroke | mm | 220 |
| Y1 軸行程 | Y1 axis stroke | mm | – |
| Y2 軸行程 | Y2 axis stroke | mm | – |
| 刀塔 | Turret | ||
| 刀塔數 | No. of turret | unit | 2 |
| 刀塔型式 | Turret type | servo | V8-st |
| 外徑刀具 | O.D. tool shank | ⧠ mm | 20 x 20 |
| 內徑刀具 | I.D. tool shank(Max.) | ∅ mm | 25 |
| 馬達 | Motors | ||
| 主軸馬達 | Spindle motor | KW | 7.5 |
| X 軸馬達 | Servo motor, X axis | KW | 1.5 X 2 |
| Z 軸馬達 | Servo motor, Z axis | KW | 1.5 X 2 |
| 油壓幫浦 | Hydraulic pump | HP | 2 |
| 潤滑油幫浦 | Lubrication pump | W | 12 |
| 切削液馬達 | Coolant pump | KW | 0.75 |
| 機械尺寸 | Machine size | ||
| 長度 | Length | mm | 4030 |
| 寬度 | Width | mm | 1920 |
| 高度 | Height | mm | 1980 |
| 淨重 | Net weight | kgs | 5000 |
| 毛重 | Gross weight | kgs | 5500 |
Specifications are subject to change without further notice.
Standard & Optional
Standard
- Full guard
- Coolant system
- Air conditioner
- Operator panel
- Tools for set up
- Pneumatic/Hyd. System
- Tower light
- Work light
- Chip conveyor
Optional
- Auto load/unload system
- Chuck
- Extension chuck sleeve
- Power turret
- Collet
- Oil mist collector
- FANUC / PC BASED
- Hydraulic tailstock
- Servo tailstock
Reviews
There are no reviews yet.