Single spindle, Gang type tool Two turrets, Twin CNC System
Two turrets can operate simultaneously and carry out different cutting process on both ends.
Two turrets can operate simultaneously and carry out different cutting process on both ends.
Features
- Single spindle, Gang type tool two turrets, Twin CNC System
Two turrets can operate simultaneously and carry out different cutting process on both ends. - Shaft, rod or tubes both ends cutting (O.D.&I.D.) are carried out simultaneously to obtain very high concentricity and benefit.
- Special auto loading & Unloading system can be fitted to handle workpiece with unsymmetrical or special-shaped on ends.
- Special spindle can be ordered for special job requirements.
- The slant bed design is 90 degree, chip is easy away from.
Specifications
| 型號 | Model | UNIT | FC-GF42/GP42 |
|---|---|---|---|
| 主軸 | SPINDLE | ||
| 主軸數 | No. of spindle | unit | 1 |
| 最高轉速 | Max.speed | rpm | 4000 |
| 進給速度 | Feedrate | ||
| X,Y(Z) 軸快速移動 | X/Z axis rapid traverse | M/min | 12 |
| 行程 | Stroke | ||
| X1 軸行程 | X1 axis stroke | mm | 420 |
| X2 軸行程 | X2 axis stroke | mm | 420 |
| Z1 軸行程 | Z1 axis stroke | mm | 220 |
| Z2 軸行程 | Z2 axis stroke | mm | 220 |
| Y1 軸行程 | Y1 axis stroke | mm | – |
| Y2 軸行程 | Y2 axis stroke | mm | – |
| 刀塔 | Turret | ||
| 刀塔數 | No. of turret | unit | 2 |
| 刀塔型式 | Turret type | servo | Gang type |
| 外徑刀具 | O.D. tool shank | ⧠ mm | 20 x 20 |
| 內徑刀具 | I.D. tool shank(Max.) | ∅ mm | 25 |
| 馬達 | Motors | ||
| 主軸馬達 | Spindle motor | KW | 7.5 |
| X 軸馬達 | Servo motor, X axis | KW | 1 X 2 |
| Z 軸馬達 | Servo motor, Z axis | KW | 1 X 2 |
| 油壓幫浦 | Hydraulic pump | HP | 2 |
| 潤滑油幫浦 | Lubrication pump | W | 12 |
| 切削液馬達 | Coolant pump | KW | 0.75 |
| 機械尺寸 | Machine size | ||
| 長度 | Length | mm | 1880 |
| 寬度 | Width | mm | 1616 |
| 高度 | Height | mm | 1975 |
| 淨重 | Net weight | kgs | 4500 |
| 毛重 | Gross weight | kgs | 5000 |
Specifications are subject to change without further notice.
Standard & Optional
Standard
- Full guard
- Coolant system
- Air conditioner
- Operator panel
- Tools for set up
- Pneumatic/Hyd. System
- Tower light
- Work light
- Chip conveyor
Optional
- Auto load/unload system
- Chuck
- Extension chuck sleeve
- Power turret
- Collet
- Oil mist collector
- FANUC / PC BASED
- Hydraulic tailstock
- Servo tailstock
Reviews
There are no reviews yet.