Allow one operator to operate two CNC lathe at the same time. Multiple effect will take place if more DP-11 are in production line. Saving production area.
Features
- Single spindle with two chunks, able to clamp two different diameters work piece.
- Tooling two different detail at the same time.
- Allow one operator to operate two CNC lathe at the same time. Mulitiple effect will take place if more DP-11 are in production line. Saving production area.
Specifications
型號 | Model | UNIT | FC-DF11/DP11 |
---|---|---|---|
主軸 | SPINDLE | 42S | |
主軸數 | No. of spindle | unit | 1 |
最高轉速 | Max.speed | rpm | 4000 |
進給速度 | Feedrate | ||
X,Y(Z) 軸快速移動 | X/Z axis rapid traverse | M/min | 16 |
行程 | Stroke | ||
X1 軸行程 | X1 axis stroke | mm | 160 |
X2 軸行程 | X2 axis stroke | mm | 160 |
Z1 軸行程 | Z1 axis stroke | mm | 220 |
Z2 軸行程 | Z2 axis stroke | mm | 220 |
Y1 軸行程 | Y1 axis stroke | mm | – |
Y2 軸行程 | Y2 axis stroke | mm | – |
刀塔 | Turret | ||
刀塔數 | No. of turret | unit | 2 |
刀塔型式 | Turret type | servo | V8-st |
外徑刀具 | O.D. tool shank | ⧠ mm | 20 x 20 |
內徑刀具 | I.D. tool shank(Max.) | ∅ mm | 25 |
馬達 | Motors | ||
主軸馬達 | Spindle motor | KW | 7.5 |
X 軸馬達 | Servo motor, X axis | KW | 1.5 |
Z 軸馬達 | Servo motor, Z axis | KW | 1.5 |
油壓幫浦 | Hydraulic pump | HP | 2 |
潤滑油幫浦 | Lubrication pump | W | 12 |
切削液馬達 | Coolant pump | KW | 0.75 |
機械手臂馬達X/Y/Z/C軸 | X/Y/Z/C-axis Robot Motor(Opt) | KW | 0.4/0.4/0.75/0.75 |
機械尺寸 | Machine size | ||
長度 | Length | mm | 3920 |
寬度 | Width | mm | 2150 |
高度 | Height | mm | 1900 |
淨重 | Net weight | kgs | 4500 |
毛重 | Gross weight | kgs | 5000 |
Specifications are subject to change without further notice.
Standard & Optional
- Full guard
- Coolant system
- Air conditioner
- Operator panel
- Tools for set up
- Pneumatic/Hyd. System
- Tower light
- Work light
- Chip conveyor
- Auto load/unload system
- Chuck
- Extension chuck sleeve
- Collet
- Oil mist collector
- FANUC / PC BASED
- Hydraulic tailstock
- Servo tailstock
商品評價
目前沒有評價。